Toyota Corolla 2020, Quick Reference Manual

Page: 42 / 56

40
TOYOTA SAFETY SENSE ™
Automatic High Beams (AHB)
ACTIVATING THE AHB SYSTEM
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
When all of these conditions are met, high beams will be automatically turned on
(after approximately 1 second):
• Vehicle speed is above approximately 21 mph (34 km/h).
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail lights turned
on.
• There are few streetlights on the road ahead.
If any of these conditions occur, high beams will be automatically turned off:
• Vehicle speed drops below approximately 17 mph (27 km/h).
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights turned on.
• There are many streetlights on the road ahead.
AHB is a safety system designed to help drivers see more of what’s ahead at nighttime
while reducing glare for oncoming drivers. AHB uses an in-vehicle camera to help
detect the headlights of oncoming vehicles and tail lights of preceding vehicles,
then automatically switches between high and low beams as appropriate to provide
the most light possible and enhance forward visibility. By using high beams more
frequently, the system may allow earlier detection of pedestrians and obstacles.
Refer to the Toyota Owner’s Manual for additional information on AHB operation,
settings adjustments, limitations, and precautions before attempting to use it.
(2) (1)
(1) Press the “ ” switch.
(2) Push lever away from you with the headlight switch is in the “ ” or “AUTO”
position.
The AHB indicator will come on when the headlights are turned on automatically
to indicate that the system is active.
Note: Pull the lever back toward you or press the AHB switch to turn the AHB
system off.
The AHB indicator will turn off. To turn switch to “ ” position and the manual
high beam indicator “ ” turns on.
117388_A_MY20_Corolla_QRG_V5_ML_1219_Text_R1.indd 40 1/2/19 4:27 PM