Toyota Corolla 2016 Owner'S Manual Download Page 513

Page: 513 / 623

511

8-2. Steps to take in an emergency

hen
trou

e ar

ise
s

COROLLA_TMMMS_TMMC_U (OM12J84U)

Indicates a malfunction in the vehicle’s charging
system.

→

Immediately stop the vehicle in a safe place
and contact your Toyota dealer. Continuing
to drive the vehicle may be dangerous.

Indicates a malfunction in the smart key system
(if equipped).

A buzzer also sounds.

→

Have the vehicle inspected by your Toyota
dealer.

Indicates a malfunction in the cruise control sys-
tem (if equipped).

• Press the “ON-OFF” button once to deacti-

vate the system, and then press the button
again to reactivate the system.

• A buzzer also sounds.

→

Have the vehicle inspected by your Toyota
dealer.

Indicates abnormal engine oil pressure.

The warning message is shown if the engine oil
pressure is too low.

→

Immediately stop the vehicle in a safe place
and contact your Toyota dealer. Continuing
to drive the vehicle may be dangerous.

Vehicles without a smart key system:

Indicates that the engine switch is turned off or

turned to the “ACC” position mode and the

driver’s door is opened while the lights are turned

on.

A buzzer also sounds.

→

Turn the lights off.

Vehicles with a smart key system:

Indicates that the engine switch is turned off or

turned to ACCESSORY mode and the driver’s

door is opened while the lights are turned on.

A buzzer also sounds.

→

Turn the lights off.

Warning message

Details/Actions

(Flashes)

Summary of Contents for Corolla 2016
















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla 2016

Reviews:

Related manuals for Corolla 2016

Brands by name

Popular brands

Toyota Corolla 2016, Owner'S Manual

Search results

Summary of Contents for Corolla 2016

Reviews:

Related manuals for Corolla 2016

Brands by name

Popular brands