Toyota Corolla 2008 Owner'S Manual Download Page 118 | Manualshive

Page: 118 / 310

background image

’08 Corolla_U (L/O 0706)

30

2008 COROLLA from Aug. ’07 Prod. (OM12B28U)

Sliding operation

Tilting operation

To operate the moon roof, use the
switches beside the personal light.

The moon roof works when the ignition
switch is in the “ON” position.

The sun shade can be opened or closed
by hand.

Sliding operation—

To open: Push the switch on the rear
side.

The sun shade will be opened together
with the roof.

To close: Push the switch on the front
side.

As a precaution when closing, the roof
stops at the half closed position before
fully closing. Therefore, release the switch
and then push it again to close it com-
pletely.

Tilting operation—

To tilt up: Push the switch on the “UP”
side.
To lower: Push the switch on the opposite
side of the “UP” side.

You may stop the moon roof at any de-
sired position. The roof will move while
the switch is being pushed and stop when
released.

CAUTION

To avoid death or serious injury, you
must do the following.

While the vehicle is moving, always
keep the heads, hands and other
parts of the bodies of all occupants
away from the roof opening. Other-
wise, they could be killed or seri-
ously injured if the vehicle stops
suddenly or if the vehicle is in-
volved in an accident.

Before you close the moon roof,
always make sure there is nobody
around the moon roof. You must
also make sure nobody places his
or her head, hands and other parts
of the body in the roof opening. If
someone’s neck, head or hands get
caught in the closing roof, it could
result in death or serious injury.
When anyone closes the moon roof,
first make sure it is safe to do so.

Be sure to remove the ignition key
when you leave your vehicle.

Electric moon roof

«
...
116
117
118
119
120
...
»

Summary of Contents for Corolla 2008























































































































































































































































































































Reviews:

No comments

Related manuals for Corolla 2008

Brand: APEXi Pages: 18

Brand: Prorack Pages: 15

Brand: Alpine Pages: 69

Brand: Allen Sports Pages: 2

Brand: Curt Manufacturing Pages: 6

Brand: CITROËN Pages: 301

Brand: Icom Pages: 20

Brand: Vauxhall Pages: 259

Brand: SCC Pages: 4

Brand: Metra Electronics Pages: 8

Brand: Jaeger Pages: 14

Brand: Rydeen Pages: 14

Brand: Volvo Pages: 18

CHALLENGER HELLCAT 2017

Brand: Dodge Pages: 484

Brand: Scosche Pages: 32

Nova Electronics Hide-a-Led DEUCE DUAL HEAD W600

Brand: Ecco Pages: 2

Brand: Velleman Pages: 17

Brand: Tuff Tonneaus Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands