Toyota Corolla 2006 Operating Manual Download Page 32 | Manualshive

Page: 32 / 295

Toyota Corolla 2006 Operating Manual Download Page 32

’06 Corolla_U (L/O 0508)

24

To open the trunk lid from the driver’s
seat, pull up on the lock release lever.

After closing the trunk lid, insert the
master key and turn it counterclockwise
to deactivate the lock release lever.

After closing the trunk lid, try pulling it up
to make sure it is securely locked.

If a person is locked in the trunk,
he/she can pull down the phosphores-
cent handle on the inside of trunk lid
to open the trunk lid.

The phosphorescent (glow- in- the- dark)
handle will continue to glow for a time
after the trunk lid is closed. Exposing the
handle to stronger light will cause it to
glow longer.

—Lock release lever

—Lock release lever
cancelling system

—Internal trunk release handle

«
...
30
31
32
33
34
...
»

Summary of Contents for Corolla 2006








































































































































































































































































































Reviews:

No comments