manualshive.com logo in svg

Toyota Corolla 2004, Operating Manual

The Toyota Corolla 2004 manual is available for free download on our website. This comprehensive user manual includes detailed instructions on operating and maintaining your vehicle. Get the most out of your Toyota Corolla 2004 by downloading the manual from manualshive.com and have it at your fingertips whenever you need it.

Share
Download
background image

’04 Corolla_U (L/O 0306)

41

2004 COROLLA from Oct. ’03 Prod. (OM12859U)

The SRS (Supplemental Restraint Sys-
tem) front airbags are designed to pro-
vide further protection for the driver
and front passenger in addition to the
primary safety protection provided by
the seat belts.

In response to a severe frontal impact,
the SRS front airbags work together with
the seat belts to help reduce injury by
inflating. The SRS front airbags help re-
duce injuries mainly to the driver’s or front
passenger’s head or chest caused by hit-
ting the vehicle interior.

The front passenger airbag is activated
even with no passenger in the front seat.

Always wear your seat belt properly.

Your vehicle is equipped with a crash
sensing and diagnostic module, which will
record the use of the seat belt restraint
system by the driver when the SRS front
airbags are inflated.

CAUTION

The SRS front airbag system is de-
signed only as a supplement to the
primary protection of the driver and
front passenger seat belt systems.
The driver and front passenger can
be killed or seriously injured by the
inflating airbags if  they do not wear
the available seat belts properly.
During sudden braking just before
a collision, an unrestrained driver
or front passenger can move for-
ward into direct contact with or
close proximity to the airbag which
may then deploy during the colli-
sion. To ensure maximum protection
in an accident,  the driver and all
passengers in the vehicle must
wear their seat belts properly. Wear-
ing a seat belt properly during an
accident reduces the chances of
death or serious injury or being
thrown out of the vehicle. For in-
structions and precautions concern-
ing the seat belt system, see “Seat
belts” on page 33 in this Section.

SRS driver airbag and front
passenger airbag

Summary of Contents for Corolla 2004












































































































































































































































































Reviews:

No comments

Related manuals for Corolla 2004

Harmar Mobility AL001 Installation And Owner'S Manual preview
AL001
Brand: Harmar Mobility Pages: 10
IAG IAG-ENG-5003BK Instructions preview
IAG-ENG-5003BK
Brand: IAG Pages: 3
Sirius Satellite Radio Streamer GTR Installation Manual preview
Streamer GTR
Brand: Sirius Satellite Radio Pages: 8
EEZ RV 51 SC Instruction Manual preview
51 SC
Brand: EEZ RV Pages: 31
Thule Kit 2161 Fitting Instructions preview
Kit 2161
Brand: Thule Pages: 2
Vangear Woody-Pod Instruction Manual preview
Woody-Pod
Brand: Vangear Pages: 5
Safe Fleet FRC SafeTrack Hardware Installation Manual preview
FRC SafeTrack
Brand: Safe Fleet Pages: 20
Hummer HX-T Owner'S Manual preview
HX-T
Brand: Hummer Pages: 31
Cadillac ESCALADE ESV 2005 Owner'S Manual preview
ESCALADE ESV 2005
Brand: Cadillac Pages: 482
curt CM-58967 Installation Manual preview
CM-58967
Brand: curt Pages: 4
Audiovox Prestige 128-8602 Installation Manual preview
Prestige 128-8602
Brand: Audiovox Pages: 8
Acura 08L03-TA1-200A Installation Instructions preview
08L03-TA1-200A
Brand: Acura Pages: 4
Menabo KIT+1 MERAK Fitting Instructions Manual preview
KIT+1 MERAK
Brand: Menabo Pages: 8
Axxess AXGMLN-09 Installation Instructions preview
AXGMLN-09
Brand: Axxess Pages: 4
DICE DCR-150 Installation Manual preview
DCR-150
Brand: DICE Pages: 1
Hudson Super-Six 1926 Instruction Book preview
Super-Six 1926
Brand: Hudson Pages: 24
Feniex QUAD QSM-8101 Manual preview
QUAD QSM-8101
Brand: Feniex Pages: 4
Ace K9 HA-2520 Installation Manual preview
HA-2520
Brand: Ace K9 Pages: 14

Brands by name

Popular brands

Load more brands