Toyota Corolla 2000 Operating Manual Download

Page: 72 / 241

2000 Corolla(U)

To adjust the rear view mirror, simply
operate the control lever.

NOTICE

If ice should jam the mirror, do not
operate the control or scrape the mir-
ror face. Use a spray de- icer to free
the mirror.

To adjust a mirror, use the switches.

1. Master switch—To select the mirror to

be adjusted

Place the switch at “L” (left) or “R” (right).

2. Control switch—To move the mir-

ror P ush the switch in the desired
direction.

Mirror can be adjusted when key is in the
“ACC” or “ON” position.

NOTICE

If ice should jam the mirror, do not
operate the control or scrape the mir-
ror face. Use a spray de- icer to free
the mirror.

Adjust the mirror so you can just see
the rear of your vehicle in the mirror.

To reduce glare from the headlights of
the vehicle behind you during night
driving, operate the lever on the lower
edge of the mirror.

Daylight driving—Lever at position 1

The reflection in the mirror has greater
clarity at this position.

Night driving—Lever at position 2

Remember that by reducing glare you also
lose some rear view clarity.

—Rear view mirror remote
control

—Power rear view mirror
control

Anti- glare inside rear view
mirror

Summary of Contents for Corolla 2000


















































































































































































































































Search results

Summary of Contents for Corolla 2000

Reviews:

Related manuals for Corolla 2000

Brands by name

Popular brands

Toyota Corolla 2000, Operating Manual

Search results

Summary of Contents for Corolla 2000

Reviews:

Related manuals for Corolla 2000

Brands by name

Popular brands