Toyota Car, Manual, Page: 159 / 230

149
To raise the vehicle, insert the jack handle
end into the jack (it is a loose fit) and
turn it clockwise with the wheel nut
wrench, making sure the wheel nut wrench
remains firmly fitted onto the jack handle
extension. As the jack touches the vehicle
and begins to lift, double
− check that it is
properly positioned.
CAUTION
Never get under the vehicle when the
vehicle is supported by the jack
alone.
40h047a
7. Remove the wheel nuts and change
tires.
Lift the flat tire straight off and put it
aside.
Roll the spare wheel into position and
align the holes in the wheel with the bolts.
Then lift up the wheel and get at least the
top bolt started through its hole. Wiggle
the tire and press it back over the other
bolts.
40f032
Before putting on wheels, remove any cor-
rosion on the mounting surfaces with a
wire brush or such. Installation of wheels
without good metal − to − metal contact at the
mounting surface can cause wheel nuts to
loosen and eventually cause a wheel to
come off while driving.
—Changing wheels