Toyota Camry Hybrid 2018 Owner'S Manual Download Page 113

Page: 113 / 596

113

2. Instrument cluster

Instrument cluster

Odometer/trip meter (

→

P. 125)

Shift position (

→

P. 213)

Outside temperature (

→

P. 96)

Menu icons (

→

P. 114)

“ODO/TRIP” switch (

→

P. 113)

Meter control switches (

→

P. 113)

◆

Using the content display area

The content display area is operated using the meter control
switches.

Scroll screens

, change the

displayed content

and move

the cursor

Press: Enter/Set

Press and hold: Reset/Dis-
play the next screen

Return to the previous
screen

Pressing and holding the switch will display the first screen of the
selected menu icon.

: When the screen can be scrolled or different content can be displayed,

a mark, such as an arrow, will be displayed to suggest which switch to
operate.

◆

Using the odometer/trip meter

Items in this area are operated using the “ODO/TRIP” switch.

Press: Change displayed item

Each time the switch is pressed,
the displayed item will be
changed.

Press and hold: Reset

Display the desired trip meter
and press and hold the switch to
reset the trip meter.

Using the multi-information display

6
7
8
9

Summary of Contents for Camry Hybrid 2018





















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Camry Hybrid 2018

Reviews:

Toyota Camry Hybrid 2018, Owner'S Manual, Page: 113 / 596

Search results

Summary of Contents for Camry Hybrid 2018

Reviews: