Toyota C-HR2018 Page 92 Owner'S Manual Download

Page: 92 / 516

2. Instrument cluster

C-HR_OM_USA_OM10526U

The settings of the following items can be changed, refer to P. 474.

For functions that can be enabled or disabled, the function switches
between on and off each time

is pressed.

●

LDA (Lane Departure Alert) (

→

P. 226)

Select to set up the following items.

• Steering Assist on/off
• Alert sensitivity
• Sway Alert on/off
• Sway sensitivity

●

PCS (Pre-Collision System) (

→

P. 211)

Select to set up the following items.

• PCS on/off
• PCS sensitivity

●

BSM (Blind Spot Monitor) (

→

P. 253)

Select to set up the following items.

• BSM function on/off
• RCTA function on/off

: The RCTA function can be enabled/disabled only when the BSM func-

tion is enabled.

●

Driving mode select (

→

P. 251)

Settings display

Summary of Contents for C-HR2018





































































































































































































































































































































































































































































































































Search results

Summary of Contents for C-HR2018

Reviews:

Related manuals for C-HR2018

Brands by name

Popular brands

Toyota C-HR2018, Owner'S Manual

Search results

Summary of Contents for C-HR2018

Reviews:

Related manuals for C-HR2018

Brands by name

Popular brands