Toyota C-HR 2017, Owner'S Manual

Page: 57 / 292

57
2. CONNECTIVITY SETTINGS
BASIC
F
UNC
TION
2
C-HR_Navi_USA_OM10581U_17CY
3. Wi-Fi
®
Hotspot*
1
Enable the Wi-Fi
®
Hotspot function.
(

P.57)
2
Disable the “Hide Access Point” func-
tion. (

P.57)
3
Search for the vehicle access point us-
ing the device you wish to connect.
 For details about operating the device,
refer to the documentation which came
with it.
4
Operate the device to connect it to the
vehicle access point.
 To check the vehicle access point pass-
word, check “Password”. (

P.59)
1
Enable the Wi-Fi
®
Hotspot function.
(

P.57)
2
Enable the “Hide Access Point” func-
tion. (

P.57)
3
Enter the access point name (SSID)
into the device you wish to connect and
connect it.
 To check the vehicle access point pass-
word, check “Password”. (

P.59)
 The security settings on the device must
be the same as that displayed for “Secu-
rity”. (

P.59)
 For details about operating the device,
refer to the documentation which came
with it.
1
Press the “MENU” button.
2
Select “Setup” .
3
Select “Wi-Fi” .
By connecting a device to the vehicle
via Wi-Fi
®
, it can access the internet
through the DCM.
• To use this function, a Wi-Fi
®
Hotspot
service subscription from Verizon Wire-
less is required. Contact your Toyota
dealer for details.
• This function is not made available in
some countries or areas.
CONNECTING A DEVICE TO
THE IN-VEHICLE ACCESS
POINT
SEARCHING FOR AND
CONNECTING A DEVICE TO
THE VEHICLE ACCESS POINT
INFORMATION
●
Hints for connecting to the vehicle via
Wi-Fi
®
can be displayed. (

P.57)
CONNECTING A DEVICE TO
THE IN-VEHICLE ACCESS
POINT USING THE ACCESS
POINT NAME (SSID)
CHANGING THE Wi-Fi
®
SETTINGS
BG054S
*: Entune Audio Plus/Entune Premium Audio only