Toyota C-HR 2017, Owner'S Manual

Page: 173 / 292

173
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
PHO
N
E
7
C-HR_Navi_USA_OM10581U_17CY
1
Display the message screen.
(

P.170)
2
Select the desired message from the
list.
3
Select “Reply” .
4
Select “Quick Message” .
5
Select the desired message.
: Select to edit the message.
(

P.173)
6
Select “Send” .
“Cancel” : Select to cancel sending the
message.
 While the message is being sent, a send-
ing message screen is displayed.
7
Check that a confirmation screen is
displayed when the operation is com-
plete.

If an error message is displayed, follow
the guidance on the screen to try again.
■
EDITING QUICK REPLY MESSAG-
ES
1
Select corresponding to the de-
sired message to edit.
2
Select “OK” when editing is complet-
ed.
*: Entune Premium Audio only
REPLYING TO A MESSAGE
(QUICK REPLY)
15 messages have already been
stored.
INFORMATION
● Depending on the type of Bluetooth
®
phone, reply function is not available.
This operation cannot be performed
while driving.
INFORMATION
● To reset the edit quick reply messages,
select
“Default” .
●
“Quick Message 1” (“I am driving and
will arrive in approximately [##]
minutes.”)*
:
This message cannot be edited and will
automatically fill in [##] with the
navigation calculated estimated time of
arrival on the confirm message screen.
If there are waypoints set, [##] to the
next waypoint will be shown.
If there is no route currently set in the
navigation system, “Quick Message 1”
cannot be selected.