5
Working with the truck
136
▷
Move the control for the starting aid upward or downward for the desired
travel direction. Undo the catch to move the control downward.
▷
Move the control to the neutral position when the function is not in use.
Always clean and lubricate the starting aid unit internally in the event of a
malfunction (blocking/jamming of wheels and/or handles).
5.4.5 LHM230X user manual
The instructions below is an addendum to other information in the manual,
and apply specifically to this truck.
Note:
Never leave a truck with a lifted load and the handbrake applied.
Note:
There is a risk of crushing, never have a finger under the locking lever.
Note:
Adapt the speed according to the incline and surface. Maximum inclina-
tion is 5 % for using a truck with handbrake.
▷
a
▷
Before using the truck, check that the brake cable (a) is not damaged.
▷
Check that the braking force is sufficient, and adjust the cable tension if
needed.
▷
Pull the parking brake lever upwards to activate the handbrake.
▷
The handbrake also doubles as a parking brake. Push the lock lever to-
wards the detent when the truck is braked in order to lock the brake.
▷
Release the parking brake by pulling the brake handle upward and mov-
ing the lock lever outward.
Summary of Contents for BT lifter LHM075H
