Toyota Auris HB 2018, Owner'S Manual

Page: 139 / 592

139
3-2. Opening, closing and locking the doors
UK AURIS_HV_HB_EE (OM12M49E)
3
Operat
ion
o
f ea
ch
co
mp
onen
t
●
If the electronic key is inside the vehicle and a door handle becomes wet
during a car wash, a message may be shown on the multi-information dis-
play and a buzzer will sound outside the vehicle. To turn off the alarm, lock
all the doors.
● The lock sensor may not work properly if it comes into contact with ice,
snow, mud, etc. Clean the lock sensor and attempt to operate it again.
● A sudden handle operation or a handle operation immediately after entering
the effective range may prevent the doors from being unlocked. Touch the
door unlock sensor and check that the doors are unlocked before pulling the
door handle again.
●
If there is another electronic key in the detection area, it may take slightly
longer to unlock the doors after the door handle is gripped.
■
When the vehicle is not driven for extended periods
● To prevent theft of the vehicle, do not leave the electronic key within 2 m
(6 ft.) of the vehicle.
●
The smart entry & start system can be deactivated in advance. (

P. 566)
■ To operate the system properly
Make sure to carry the electronic key when operating the system. Do not get
the electronic key too close to the vehicle when operating the system from the
outside of the vehicle.
Depending on the position and holding condition of the electronic key, the key
may not be detected correctly and the system may not operate properly. (The
alarm may go off accidentally, or the door lock prevention function may not
operate.)
■
If the smart entry & start system does not operate properly
●
Locking and unlocking the doors: Use the mechanical key. (

P. 536)
●
Starting the hybrid system:

P. 537
■
Customization
Settings (e. g. smart entry & start system) can be changed.
(Customizable features:

P. 566)
■
If the smart entry & start system has been deactivated in a customized
setting
●
Locking and unlocking the doors:
Use the wireless remote control or mechanical key. (

P. 124, 536)
● Starting the hybrid system and changing power switch modes:

P. 537
●
Stopping the hybrid system:

P. 212