TOYOTA/SCION/LEXUS
See ‘General Applicability’
ASHTRAY
Procedure
for Models/Years
Page 2 of 3 pages
Issue: B
4/25/13
DIO
Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this
accessory should follow approved guidelines to ensure a quality installation.
These guidelines can be found in the "Accessory Installation Practices" document.
This document covers such items as:-
Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.).
Safety (eye protection, rechecking torque procedure, etc.).
Vehicle Disassembly/Reassembly (panel removal, part storage, etc.).
Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.).
Please see your Toyota dealer for a copy of this document.
1.
Install the Ashtray (Front Cup Holder).
(a)
Insert the ashtray into the front cup holder of
the center console. (Fig. 1-1)
2.
Install the Ashtray (Rear Cup Holder).
(a)
Insert the ashtray into the rear cup holder of
the center console (Fig. 2-1)
3.
Caution.
(a)
When not using the ashtray, close the door.
While driving, a cigarette butt may drop out
of the ashtray if it is left open.
(b)
Make sure to put a cigarette butt into the
ashtray after completely stubbing out the
lighted cigarette and close the door. Failure
to do so may cause a fire in the vehicle.
(c)
Never put something inflammable such as
wastepaper in the ashtray or a fire may be
caused in the vehicle.
(d)
Never drop the ashtray onto hard ground
surface or damage may result.
(e)
Never apply excessive force to the ashtray
door when it is open or damage may result.
(f)
Remove the ashtray slowly. Removing it
quickly may cause a cigarette butt drop out
of the ashtray.
(g)
Open and close a vehicle door with the
ashtray door closed. A cigarette butt may
drop out of the ashtray if it is left open.
Ashtray
Fig. 2-1
Front
Center console
Ashtray
Fig. 1-1
Front
Center console
