EM-46
SST
ENGINE MECHANICAL - Timing Belt (4A-FE)
EM4284
EM7004
EM6239
(b) lf the measured value is not within standard, readjust
with the idler pulley.
6.
INSTALL TIMING BELT GUIDE
lnstall the guide, facing the cup side outward.
7.
INSTALL TIMING BEL T COVERS
8.
(a) lnstall the No.1 timing belt cover with the three bolts.
(b) lnstall the No.2, No.3 timing belt covers and engine
wire bracket with the six bolts.
INSTALL CRAN KSHAFT PU LLEY
(a) Align the pulley set key with the key groove of the
pulley, slide on the pulley.
{b) Temporarily install the pulley bolt.
SST 09213-14010 and 09330-00021
Torque: 1,200 kg-cm {87 ft-lb, 118 N·m)
9.
INSTALL CYLINDER HEAD COVER
(See steps 14 and 18 on
pages EM-86
and 88)
10. INSTALL SPARK PLUGS (See page IG-8)
Torque: 180 kg-cm {13 ft-lb, 18 N·m)
11. INSTALL WATER PUMP PULLEV AND DRIVE BELT
12. CHECK AND ADJUST DRIVE BEL T
(See step
3
on pages CH-3
and 4)
