210
2-3. Operating the lights and wipers
LC200_OM_OM60L83U_(U)
■
The windshield wiper and washer can be operated when
The “ENGINE START STOP” switch is in IGNITION ON mode.
■
Effects of vehicle speed on wiper operation (vehicles with rain-sensing
windshield wipers)
Vehicle speed affects the wiper operation when the washer is being used
(delay until drip prevention wiper sweep occurs) even when the wipers are
not in “AUTO” mode.
With “
” selected, wiper operation will be switched from low speed to
intermittent wiper operation only when the vehicle is stationary.
(However, when the sensor sensitivity is adjusted to the highest level, the
mode cannot be switched.)
■
Rain drop sensor (vehicles with rain-sensing windshield wipers)
●
If the wiper switch is turned to “AUTO” position while the “ENGINE
START STOP” switch is in IGNITION ON mode, the wiper will operate
once to show that “AUTO” mode is activated.
●
If the temperature of the rain drop sensor is 176
F (80
C) or higher, or
14
F (-10
C) or lower, automatic operation may not occur. In this case,
operate the wipers in any mode other than “AUTO”.
■
If no windshield washer fluid sprays
Check that the washer nozzles are not blocked if there is washer fluid in the
windshield washer fluid reservoir.
●
The sensor judges the amount of rain-
drops.
Summary of Contents for 2015 Land Cruiser 200
