Toyota 2014 Sienna, Manual

Page: 277 / 872

277
2-3. Operating the lights and wipers
2
When
d
riving
SIENNA_OM_OM45483U_(U)
Automatic High Beam


: If equipped
The Automatic High Beam uses an in-vehicle camera sensor to
assess the brightness of streetlights, the lights of oncoming and
preceding vehicles, etc., and automatically turns high beam on or off
as necessary.
■
Activating the Automatic High Beam system
Push the lever away from you
with the headlight switch in the
position when the
engine switch is in the “ON”
position (vehicles without a
smart key system) or the
“ENGINE START STOP”
switch is in IGNITION ON
mode (vehicles with a smart
key system).
The Automatic High Beam indi-
cator will come on when the
headlights are turned on auto-
matically to indicate that the
system is active.