Toyota 2013 Prius PHV, Owner'S Manual

Page: 358 / 744

290
2-2. Instrument cluster
PRIUS PHV_OM_OM47787U_(U)
■
When driving on snowy roads or in other bright environments
When the highest level of brightness has been reached, the display can be
made even brighter by pressing and holding “
∧
” on the brightness control
button.
Pressing “
∨
” on the brightness control button or turning the “POWER” switch
off will cause the brightness level to revert to the original level.
■
Display speed setting function
The speedometer can be set to display only when a desired vehicle speed is
reached.
Press and hold the “HUD” main switch while the vehicle is stopped
and while the head-up display is showing only the speedometer.
The speedometer will begin to flash.
Set the desired display speed on the speedometer by pressing “
∧
”
and “
∨
” on the display position adjustment button.
Press “
∧
” to raise the speed and “
∨
” to lower. The speed will change
by 1 mph (1.6 km/h) each time the button is pressed, and continu-
ously by 10 mph (16 km/h) when the button is pressed and held.
Press and hold the “HUD” main switch to finish setting.
■
Head-up display
The head-up display may seem dark and hard to see when viewed through
sunglasses, especially polarized sunglasses.
Adjust the brightness of the head-up display or remove your sunglasses.
■
When the 12-volt battery is disconnected
The head-up display settings will be reset.
STEP 1
STEP 2
STEP 3