Toyota 2006 TACOMA Operating Manual Download Page 142

Page: 142 / 417

142

2006 TACOMA from Jan.’06 Prod. (OM35865U)

LS15005

To turn on the emergency flashers,
push the switch.

All the turn signal lights will flash. To turn
them off, push the switch once again.

Turn on the emergency flashers to warn
other drivers if your vehicle must be
stopped where it might be a traffic hazard.

Always pull as far off the road as pos-
sible.

The turn signal light switch will not work
when the emergency flashers are operat-
ing.

NOTICE

To prevent the battery from being dis-
charged, do not leave the switch on
longer than necessary when the en-
gine is not running.

LS15006

To adjust the brightness of the instru-
ment panel lights, turn the dial.

06 01.06

Emergency flashers

Instrument panel light control

Summary of Contents for 2006 TACOMA


































































































































































































































































































































































































































Search results

Summary of Contents for 2006 TACOMA

Reviews:

Brands by name

Popular brands

Toyota 2006 TACOMA, Operating Manual

Search results

Summary of Contents for 2006 TACOMA

Reviews:

Brands by name

Popular brands