Toyota 2006 Hilux Mk6 Owner'S Manual Download Page 97

Page: 97 / 196

Fan speed selector

Turn the knob to adjust the fan speed—to
the right to increase, to the left to de-
crease.

Temperature selector

Turn the knob to adjust the tempera-
ture—to the right to warm, to the left to
cool.

i17024

Air flow selector

Turn the knob to select the vents used for
air flow.

1. Panel—Air flows mainly from the

instrument panel vents.

2. Bi- level—Air flows from both the floor

vents and the instrument panel vents.

3. Floor—Air flows mainly from the floor

vents.

4. Floor/Windshield—Air flows mainly

from the floor vents and windshield
vents.

Use with the air intake selector posi-
tioned in Fresh.

5. Windshield—Air flows mainly from the

windshield vents.

Use with the air intake selector positioned
in Fresh.

For details about air flow selector settings,
see “Air flow selector settings” described
below.

Summary of Contents for 2006 Hilux Mk6





































































































































































































Search results

Summary of Contents for 2006 Hilux Mk6

Reviews:

Related manuals for 2006 Hilux Mk6

Brands by name

Popular brands

Toyota 2006 Hilux Mk6, Owner'S Manual

Search results

Summary of Contents for 2006 Hilux Mk6

Reviews:

Related manuals for 2006 Hilux Mk6

Brands by name

Popular brands