manualshive.com logo in svg

Toyota 2004 LAND CRUISER 100, Owner'S Manual

Share
Download
Toyota 2004 LAND CRUISER 100 Owner'S Manual Download Page 408

AUDIO SYSTEM

168

(h) DVD player and DVD video
disc information

(i)

DVD video discs

This DVD player conforms to NTSC color
TV formats.  The DVD video disc conform-
ing to another formats such as PAL or SE-
CAM cannot be used.

Region codes:  Some DVD video discs have
a region code indicating a country where you
can use the DVD video disc on this DVD play-
er.  If the DVD video disc is not labeled as
“ALL” or “1”, you cannot use it on this DVD
player.  If you attempt to play an inappropriate
DVD video disc on this player, “REGION
CODE ERROR” appears on the screen.
Even if the DVD video disc does not have a re-
gion code, there is a case that you cannot use
it.

Marks shown on DVD video discs:

Indicates NTSC format
of color TV.

Indicates the number of
audio tracks.

Indicates the number of
language subtitles.

Indicates the number of
angles.

Indicates the screen to
be selected.
Wide screen: 16 : 9
Standard: 4 : 3

Indicates a region code
by which this video disc
can be played.
ALL: in all countries
Number: region code

(ii)

DVD video disc glossary

DVD video discs:  Digital versatile Disc that
holds video.  DVD video discs have adopted
“MPEG2”, one of the world standards of digi-
tal compression technologies.  The picture
data is compressed by 1/40 on average and
stored.  Variable rate encoded technology in
which the volume of data assigned to the pic-
ture is changed depending on the picture for-
mat has also been adopted.  Audio data is
stored using PCM and Dolby digital, which
enables higher quality of sound.  Further-
more, multi-angle and multi-language fea-
tures will also help you enjoy the more ad-
vanced technology of DVD video.

Viewer restrictions:  This feature limits what
can be viewed in conformity with a level of re-
strictions of the country.  The level of restric-
tions varies depending on the DVD video
disc.  Some DVD video discs cannot be
played at all, or violent scenes are skipped or
replaced with other scenes.

Level 1:  DVD video discs for children can be
played.

Level 2 - 7:  DVD video discs  for children and
G-rated  movie can be played.

Level 8:  All types of the DVD video discs can
be played.

Summary of Contents for 2004 LAND CRUISER 100

































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands