Toyota 1999 Sienna Owner'S Manual Download Page 83

Page: 83 / 272

name. SIENNA (45403U)

(A) INFANT SEAT INSTALLATION
An infant seat is used in rear

−

facing

position only.

CAUTION

Do not put a rear

−

facing child re-

straint system on the third seat if it

interferes with the lock mechanism of

the second seats. This can cause se-
vere injury to the child and front pas-

senger in case of sudden braking or

a collision.

1. Run the center lap belt through or

around the infant seat following the
instructions provided by its manufactur-

er and insert the tab into the buckle

taking care not to twist the belt.

—Installation with 2

−

point

type seat belt

Summary of Contents for 1999 Sienna

















































































































































































































































































Search results

Summary of Contents for 1999 Sienna

Reviews:

Brands by name

Popular brands

Toyota 1999 Sienna, Owner'S Manual

Search results

Summary of Contents for 1999 Sienna

Reviews:

Brands by name

Popular brands