background image

Disclaimer

Owner's Manual

© 2020 Toyota Motor Corporation Australia Ltd

12V AUXILIARY

POWER SOCKET

This product has been tested to the relevant Australian design rules.  Toyota is not responsible 
for any direct or indirect damage or injury caused by the intentional misuse of this product.

This product must be installed in accordance with supplied fitting instructions. The Toyota 12V 
Auxiliary Power Socket must not be altered in any way.

The  12V  Auxiliary  Power  Socket  includes  Smart  Circuitry  that  is  designed  to  isolate  any 
connected devices before the vehicle's battery state of charge is reduced to a level which may 
compromise vehicle restart. We recommend users limit the number of times they discharge the 
vehicle's battery to the point of isolation cut off, as repeated discharging may reduce the life of 
the vehicle battery. External factors which may influence the cut off include (but not limited to):

-

-

-

If  any  of  the  above  circumstances  are  present,  we  recommend  caution  when  running  any 
connected device into battery protection mode.

Important

Do  not  use  a  high  pressure  spray  to  clean  the  12V 
Auxiliary Power Socket.

No part of this publication may be copied, reproduced or 

distributed without consent of Toyota Australia.

Poor vehicle battery health. This includes batteries which have been damaged from previous 
flattening or the age of the vehicle battery.  Vehicle batteries in this condition hold reduced 
charge.

Extreme temperatures.

Other  uncontrolled  accessories  connected  directly  to  the  vehicle  battery  (not  monitored 
through the 12V Auxiliary Power Socket).

ISSUE 1  09/07/20

PZQ85-75295

Summary of Contents for 12V AUXILIARY POWER SOCKET













Reviews: