Page - 3
Mounting:
OPERATION:
♦
The power and movement detection indication
: The LED will flash once every 4 seconds after
power ON of the unit, and will flash every 2 seconds when the units detects the movement.
♦
Detection field
: The detection field is made up of up and down, left and right service field. (See
the following diagram). But it has the relation ship between the sensitivity and the orientation of
moving. Detection distance may vary according to the installation position and detection field.
♦
Time-delay adjustment
: The timer knob can be set according to the customer needs. The
minimum is 30 sec. and the maximum is 450 sec delay OFF.
♦
Identifies day and night automatically
: When the trimmer knob is turned towards SUN Position
(max), it will switch ON lights both in day and night. When turned towards MOON position (min),
the sensor will operate only at night (less than 10LUX ambient light)
Correct Moving Orientation
Incorrect Moving Orientation
At a distance closer to sensor the detection motion speed can
be minimum and vice versa
