TOX PRESSOTECHNIK TOX-FinePress PFL 002, Original Operating Instructions

Page: 16 / 72

Safety
16 TOX_Manual_FinePress_PFS-PFL-PFW_en
Ÿ
Do not exceed the permissible pressure.
Ÿ First switch on compressed air when all hose connections have been
established and secured.
Ÿ
Do not uncouple any hoses under pressure.
Ÿ
If hoses slip off, switch off the compressed air supply immediately.
2.3.4 Contusions
Contusions and hand injuries can occur in the radius of action of the prod-
uct.
The following applies generally:
Ÿ Make sure that that no persons are located in the danger area during
operation.
Ÿ
During necessary work in the danger area (e.g. maintenance, clean-
ing), secure the system against unexpected, accidental and unautho-
rized activation.
Ÿ Make sure that parts or tools cannot fall down or descend as a result of
stored energy. Use appropriate fuses.
2.3.5 Hydraulic hazards
Attention must be paid to hydraulic hazards particularly on the supply lines,
connection points and vent points.
The following applies generally:
Ÿ Allow work to be carried out on hydraulic equipment by authorized ser-
vice personnel only.
Ÿ
Wear individual protective equipment.
Ÿ Do not exceed the permissible pressure.
Ÿ
Do not remove any hoses under pressure.
Ÿ
Never vent hydraulic components under pressure.
2.3.6 Electromagnetic hazards
Electromagnetic hazards are to be taken into account in the area of electro-
magnetically vibrating or oscillating components.
Regular work on and with electromagnetically vibrating or oscillating com-
ponents can cause disorders in the blood flow of the fingers as well as neu-
rological and motoric dysfunctions.