TOX PRESSOTECHNIK FinePress ZFL, Original Operating Instructions

Page: 66 / 76

Disassembly and Disposal
66 TOX_Manual_FinePress_ZFS-ZFL-ZFW_en
12.3 Shutdown
Shutdown means that the system is shut down permanently and/or is pre-
pared for removal.
1. Stop system and wait for it to come to a standstill.
2. Remove material if necessary.
3. Switch off the system at the main switch and secure it against being
switched on again.
4. First disassemble or dismantle after switching off the power (electricity,
pneumatics) and after residual energy has safely dissipated (at least 3
minutes).
5. Remove electrical supply line (first at the terminal, then on the ma-
chine).
6. Remove compressed air supply line.
7. Remove network connection.
8. Clean the system and protect it against corrosion.
9. Protect open cable ends against penetration of dirt.
10. Do not remove cable identifications.
12.4 Disassembling
The system consists of recyclable materials.
NOTE
Environmental damage!
Improper recycling endangers the environment!
è
Dispose of materials separately and properly.
è Regional disposal regulations must be observed.
1. Strip the system down into its constituent parts.
2. Dispose of greases and oils separately.
3. Sort the constituent parts by material and dispose of according to the
local regulations.