TCWS.54NGST04D_120517-20
NOTE: For purposes of clarity, the “Front” of the fireplace shall be the side which has access to the
electrical connection compartment cover, the connection to the gas valve and the side which places
the control compartment cover and the coaxial vent located on top of the fireplace to your left.
1. With the electrical connection compartment to your left, insert one of the two secondary floor
panel on the right hand side of the fireplace.
2. Insert the other secondary floor panel into the left side of the firebox. As the panel is lowered, feed the
pilot assembly through the square opening in the panel as shown in Figure 3. Once the pilot is through the
hole, and the secondary floor panels are seated properly, secure them with the screws provided.
3. Secure the center leg to the right hand secondary floor panel as shown in Figure 4.
Figure 1: Inserting right side secondary floor.
Figure 2: Inserting left side secondary floor.
Figure 3: Feeding pilot assembly up through the left side
secondary floor.
Figure 4: Securing the center leg.
Installing secondary floor panels and burners
Note: If converting fireplace from natural gas to propane gas, please refer to
“Propane Conversion” on page 12 before proceeding.
3
5056.425183D
Tranquility Burner Installation
