TCWS.54NG04.C2 230911-16
NOTE: check air shutter for correct
fuel setting before proceeding
further. Both burners are the same.
Fully closed for natural gas.
13/64 (0.2)” open for LP.
4.
Secure the burner tray to legs using
eight screws (Fig. #4)
NOTE: a light will aid aligning the holes
in the tray with the leg
CAUTION: The burners should be tightly
butted up against each other at the center
to ensure correct operation.
5.
Place sand into the burner tray and
brush smooth. Use caution not to get
sand near the burner ports. (Fig. #5)
Fig #5
Fig #4
4
