5056.42519-A
TCWS.54LOGDW_210417-08
2. Place the 2nd log so that the middle of it overhangs the tray itself and rests on the edge panel as shown
in Figure 3. Note that there is a location post for the 3rd log at one end of the 2nd log. This location post
should have a vertical alignment.
Edge Panel
Edge Panel
Location post for 3rd log
Figure 3: Log 2 placement.
Edge Panel
Edge Panel
Location post for 4th log
Figure 4: Log 3 placement.
3. The 3rd log has a socket on the bottom of one end which will fi t onto the location post of the 2nd log.
Once the socket and location post have been mated, move the opposite end of the 3rd log toward the
edge panel so that its’ middle branch is resting on the edge panel (Figure 4).
3
