3
210705-12
TC36.NGST03 5056.42801.3
Black Diamond Burner Installation
1. Attach the manifold assembly to the
floor of the firebox using two screws.
(Fig. #2)
2. Connect the flex gas line to the
manifold ensuring a gas-tight
connection (Fig. #3).
3. If porcelain panels are not installed, install the left panel (Fig. #4) securing with panel retainer clip located on the
upper heat shield, and position the air channel insert into the air channel. (Fig. #5)
NOTE: The right side of the unit is the side with the control box inlet.
Fig. #2
Fig. #3
Fig. #4
Fig. #5