10.
Pull off the aluminum cap from the top
of the pressure regulator.
(Fig.
#24)
11.
Press down on the center post and rotate
90°. The center post should stay down.
(Fig. #25). Replace the aluminum cap.
12.
Fill in the date and the name of the
person who performed the conversion in
the white area on the conversion label.
Peel off the protective backing and apply
the conversion label directly over the
gas specifi cations on the rating label.
13.
Re-attach the access panel to the side
of the fi rebox with the screws previously
removed.
(Fig.
#26)
Fig #24
Fig #26
Fig #25
NG
LP
12
TC36.NG04C 290411-16
