TC30_NG04D 200317-24
5056.42904D
Figure 18: Securing side covers.
Figure 19: Inserting tapered plugs.
10
17. Move the two side covers previously placed between the burner and its base, out to the side
panels. Line the screw holes in the side covers up with the screw holes in the burner tray base.
Use supplied self taping screws to secure the covers to the base (Figure 18).
18. Insert tapered plugs into raised burner ports to prevent sand from entering ports (Figure 19).
19. Place sand in tray. Use supplied brush to spread and level the sand to just below the top of
raised burner ports. Gently blow excess sand from around ports (Figure 20).