100001022
Figure 5: Wall switch.
Using the Remote Control Transmitter
Temperature indication Display
With the remote control transmitter in the “OFF” position, press the thermostat
and mode keys at the same time. Look at the LCD screen on the remote control
transmitter to verify that a C or F is visible to the right of the room temperature
display - Figure 7 and Figure 8.
Turn on the Fireplace
With the fireplace OFF, press the ON/OFF key on the remote control transmitter.
The remote control transmitter display will show the active icons on the screen.
At the same time the wall switch will activate the fireplace via the IFC module. A
single “beep” from the IFC module will confirm reception of the command.
Figure 3: Wall switch - interface
side.
Figure 4: Wall switch - battery
side.
Program button
Figure 6: Proflame 2 remote
battery compartment.
Figure 7: Temperature in
fahrenheit.
°
C
Figure 8: Temperature in
celcius.
Turn off the Fireplace
With the fireplace ON, press the ON/OFF key on the remote control transmitter. The remote control transmitter
LCD display will only show the room temperature (Figure 7 andFigure 8). At the same time the IFC module will
turn off the fireplace. A single “beep” from the IFC module confirms reception of the command.
Manual Bypass of the Remote Fireplace
If the batteries of the remote control transmitter are low or depleted, the fireplace can be turned off manually
using ON/OFF switch located on Town & Country wall switch. This will bypass the remote control transmitter.
8
TCWS54D2_181019-20