3 USING YOUR APPLIANCE
Before first use:
Take out all the packing, if there is a safe film over
the oven, tear it off before use. Check carefully for
damage. If any, immediately notify dealer or send
to the manufacturer
’s Service Centre.
Microwave ovens must be placed under
dry and non-corrosiveness environments,
kept away from heat and humidity, such
as gas burner or water tank.
To ensure sufficient ventilation, the
distance of the back of microwave to the
wall should be at least 10 cm, the side to
the wall should be at least 5 cm, the free
distance above the top surface at least
20 cm. The distance of the microwave to
the ground should be at least 85cm.
The position of the oven shall be such that
it is far from the TV, Radio or antenna as
picture disturbance or noise may occur.
The appliance must be positioned so that
the plug is accessible, and has a good
grounding in case of leakage. A ground
loop can be formed to avoid electric shock.
The microwave oven must be operated
with the door closed.
The microwave oven must not be
placed in a cabinet.
The microwave oven is intended to be
used free-standing.
The back of the oven must be placed
against a wall.
During first use the microwave oven may omit an
odour and slightly smoke. This is due to
manufacturing residue or oil on the heat element
or oven cavity. This is normal and should not
occur after several uses. Keep doors and
windows open to ensure good ventilation.
It is recommended to place a cup of water
on the turntable on set on high and
operate the microwave oven several times
to help clean the microwave of residue.
Setting the digital clock:
With the microwave in standby mode,
use the clock button to set the digital
clock in a 12 or 24 hour cycle.
To set the clock:
1. Press the clock button.
2. Turn the Time/Weight dial to
select the correct hour.
3. Press the clock button.
4. Use the Time/Weight dial to
select the minutes.
5.
Press the clock button once
more to confirm the time setting.
Child Lock:
The Child Lock enables you to disable
operation of the microwave so that it
cannot be used unsupervised.
To set the child lock, press and hold the
Stop/ Cancel button for 3 seconds. A beep
will sound and the lock indicator will light.
To cancel the child lock, press and hold
the Stop/Cancel button for 3 seconds, until
the lock indicator on the display goes off.
8
Register online at for your
FREE
extended guarantee.
