Tower Hobbies T17022, Safety And Instruction Manual

Page: 11 / 24

4. Slide the pan back into the Air Fryer making sure to carefully align with the guides in the
body of the fryer.
5. Never use the pan without the basket in it.
Caution: Do not touch the pan immediately after use, as it gets very hot. Allow plenty of
time for it to cool. Only hold the pan by the handle.
6. Determine the required preparation time for the ingredient (refer to the
‘Settings’ section
below.)
7. To switch on the appliance, turn the timer dial to the required preparation time.
8. Turn the temperature control dial to the required temperature. Refer to the
‘Settings’
section below as a guide when determining the right temperature. Add 3 minutes to the
preparation time when the appliance is cold.
Note: If you wish, you can also preheat the appliance without any ingredients inside. In this
case, turn the timer dial to a time higher than 3 minutes and wait until the heating-up light
goes out. Then fill the basket and turn the timer dial to the required preparation time.
a. The timer will begin counting down the set preparation time.
b. During the hot air frying process, the working light will come on and go out from time
to time. This indicates that the heating element is switching itself on and off to maintain
the set temperature.
c. Excess oil from the ingredients is collected on the bottom of the pan.
9. Some ingredients require shaking halfway through the preparation time (refer to the
“Settings” section below for more information on this). To shake the ingredients, pull the
pan out of the appliance by the handle and shake it. Then slide the pan back into the fryer.
Caution: Be careful not to press the basket release button on the handle while shaking
your ingredients.
Tip: To reduce the weight, you can remove the basket from the pan and shake the basket only.
To do so, pull the pan out of the appliance, place it on a heat-resistant surface and press the
button of handle and lift the basket out of the pan.
If you set the timer to half the preparation time, the timer bell will sound when you have
to shake the ingredients. However, this means that you have to set the timer again to the
remaining preparation time after shaking.
10. When you hear the timer bell, the set preparation time has elapsed. Pull the pan out of the
appliance and place it on a suitable work surface.
Note: You can also switch off the appliance manually. To do this, turn the time control dial to 0.
11. Check if the ingredients are ready. If the ingredients are not ready yet, simply slide the pan
back into the appliance and set the timer to a few extra minutes.
11