12
LED Screen:
Your Soup Maker utilises 3 different processes to create fresh soups and drinks;
heating, blending and resting. These processes are highlighted during the
programme with a small animation on the LED Screen.
Heating -
The heating animation will appear in motion when the Soup Maker is
heating the contents of the Jug.
Blending -
The blending animation will be displayed when the Mixing Blade is in
use. When switching from heating to blending the Soup Maker will give off a single
audible beep.
Resting -
During the programme the Soup Maker will occasionally ‘rest’, at which
point no animation will be shown, but the timer on the LED Screen will continue to
count down. This is normal.
Note:
During the resting period do not lift the Lid as this will void the
programme. Once the process is completed the soup maker will beep for 60
seconds and the screen will display the ‘completed’ icon.
Completed -
When completed, your Soup Maker will show the same animation as
resting, but the timer will be at ‘0’ and all four icons on the panel will flash.
1. Begin by washing your vegetables (i.e. potatoes, carrots).
2. Chop your ingredients into pieces no larger than 1.5 – 2.5cm.
3. Remove the lid of your Tower Soup Maker and add all ingredients into the
serving jug. Ensure all of your ingredients do not surpass the Soup Max Fill line
on the jug.
4. Top up the ingredients with liquid.
5. Once all of your ingredients have been added to the Soup Maker, place the lid
back on the serving jug, making sure it is securely in place.
6. Once the cooking time has finished, check the consistency of the soup. You
can use the blend button at the end of cooking to ensure your soup is made to
your desired consistency.
7. Unplug the Soup Maker and remove the lid, being careful to avoid any steam
that it may emit. Using the handle, pour the soup into bowls to serve.
