10
Emptying the Dust Tank:
1. To empty the dust tank, begin by pulling the release button at the top of the
unit to separate it from the main unit.
2. Once the tank has been separated from the unit, twist the tank lid counter-
clockwise to loosen it. Pull the lid away from the main body of the unit to
access the round filter.
3. Remove the round filter from the unit and tap it lightly against a dustbin or
sink to clean it.
4. Pull the inlet filter out of the dust tank and shake the tank’s contents into a
dustbin
5. Once you have emptied the dust tank, fit both filters back into place and re-
attach the tank lid. Twist the tank lid clockwise to lock it and secure the dust
tank in place.
6. Once the dust tank is secured, pull the tank release tab back and affix the tank
back onto the body of the unit. The release tab will automatically click into
place and secure the dust tank to the unit.
Cleaning the Unit Body:
1. Before cleaning the unit body, ensure the unit is disconnected from the mains
supply and not in operation.
2. Use a damp cloth to clean the unit body. Never use any abrasive cleaning
materials or solvents, as these could cause damage to the surface of the unit.
WARNING!
DO NOT allow any liquids into the unit, as this could cause damage to
the electrical components and cause it to malfunction.
Storing the Appliance:
1. Before storing the appliance, insert the floor brush holder and the tubes into
the storage clip at the rear of the appliance.
2. Your appliance can now be stored.
8 - Cleaning & Care
9 - Wiring Safety for UK Use Only
WARNING:
Do not attempt to open any part of the power adaptor or plug.
(Power adapters only)
Never open the power adapter, you risk getting an electric shock.
Only use the power adapter that is supplied with your product.
You must always connect the power adapter to the product before connecting to
the mains power supply.
The power adapter must be used indoors only, and must not be subjected to damp
conditions.
The power adapter does not have any user serviceable parts.
If in doubt, consult a qualified electrician who will be pleased to do this for you.
If you need to remove the plug – disconnect it from the mains – and then cut it off
of the mains lead and immediately dispose of it in a safe manner. Never attempt
to reuse the plug or insert it into a socket outlet as there is a danger of an electric
shock.
