- 4 -
tousek
/ E_GSM-400_00 / 07. 05. 2018
• Connect the desired impulse input of the control board to the
output terminals
(OUT 1)
of the GSM-receiver according to
the technical specifications.
• Connect the GSM-antenna with the GSM-antenna connector
(A)
.
• Insert a valid SIM card
(SIM)
.
• The SIM card must have a credit in order to
be able to use all functions.
• The PIN function must be deactivated.
• The answering machine function must be
disabled.
• ATTENTION: check the functionality of the
SIM card before inserting it into the mobile
phone.
• Connect the 230 Va.c. supply line with the supply terminals
(V).
Then switch on the power supply.
• Wait approx. 30s until the connection LED
(L-S)
flashes
slowly and the device has found its network.
• Deactivate the redialing function of your
mobile phone.
• It is necessary to send your mobile phone
number.
• The GSM-LED
(L-GSM)
provides information about the
signal quality and shows possible errors.
L N
N.C. C N.O.
L-GSM
V
OUT 1
P1
L-1
L-S
SIM
A
2. Installation
GSM-receiver GSM 400
To ensure a safe and reliable operation, the GSM 400 must only be installed only by qualified personnel.
GSM-LED display
display mode
meaning
blinks rapidly
module connects to the network (approx. 30s)
illuminates
no GSM signal available
4x slow bl
pause
optimal GSM signal available
3x slow bl
pause
good GSM signal available
2x slow bl
pause
sufficient GSM signal available
1x slow bl
pause
insufficient GSM signal (signal is being tested once per minute)
4x fast bl
lights in pause
no SIM-card available
slow blinking
the SIM-card is PIN-Code protected
