Page 12
TOURnado™ IP EXA User Manual Rev. B
© Copyright 2014 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Set the Starting DMX Address:
The default mode for the fixture is DMX, so the first menu item that you can edit is the
starting DMX address.
1.) Navigate the menu using the
<UP/DOWN>
buttons until you reach
Addr
.
2.) Push the
<ENTER>
button.
3.) Use the
<UP/DOWN>
buttons to select a DMX channel from
001-512
.
4.) Press the
<ENTER>
button to confirm.
Select the DMX Channel Mode:
1.) Navigate the menu using the
<UP/DOWN>
buttons until you reach
CHnd.
2.) Push the
<ENTER>
button.
3.) Use the
<UP/DOWN>
buttons to select either
6CH, 9CH,
or
11CH
mode.
4.) Press the
<ENTER>
button to confirm.
Slave Mode:
To synchronize one or more fixtures to follow the actions of the Master fixture (the 1st unit in
the DMX chain), perform the following steps on each Slave fixture:
1.) Set the DMX address to
A001
.
2.) Navigate the menu using the
<UP/DOWN>
button until you reach
SLAU
.
3.) Push the
<ENTER>
button.
4.) Use the
<UP/DOWN>
buttons to select
SLAu
.
5.) Press the
<ENTER>
button to confirm.
Auto, Stand-Alone, & Built-in Program Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.
Auto Mode:
1.) Navigate the menu using the
<UP/DOWN>
button until you reach
ASC-
.
2.) Push the
<ENTER>
button.
3.) Use the
<UP/DOWN>
buttons to select from
AC00-AC15
.
4.) Press the
<ENTER>
button to confirm.
Standalone (Program) Mode:
Allows a single unit to display a variety of colors and programs without a DMX controller.
1.) Navigate the menu using the
<UP/DOWN>
button until you reach
Pr--
.
2.) Push the
<ENTER>
button.
3.) Use the
<UP/DOWN>
buttons to select from
Pr00-Pr63
.
4.) Press the
<ENTER>
button to confirm.
Flash/Fade Modes:
1.) Navigate the menu using the
<UP/DOWN>
buttons until you reach
FLAS
or
FAdE
.
2.) Push the
<ENTER>
button.
3.) Now, you can adjust the flash rate from
FL00-FL15
or the fade speed from
FA00-FA15
with the
<UP/DOWN>
buttons. Press the
<ENTER>
button to confirm.
Built-in Program Speed:
1.) Navigate the menu using the
<UP/DOWN>
button until you reach
SP-
.
2.) Push the
<ENTER>
button.
3.) Use the
<UP/DOWN>
buttons to select from
SP00-SP15
.
4.) Press the
<ENTER>
button to confirm.
Manual Color Adjustment:
1.) Navigate the menu using the
<UP/DOWN>
button until you reach either
rL
-- (Red),
GL
-- (Green),
bL
-- (Blue).
AL
-- (Amber),
UL
-- (White), or
uL
-- (UV) then hit
<ENTER>
.
2.) Using the
<UP/DOWN>
buttons, select the maximum level for each color between
x000-x255
(000=off), then hit
<ENTER>
to confirm.
