background image

2

Tourmaster

®

 Synergy

®

 Pro-Plus apparel is designed to operate from your vehicle’s standard 12-volt 

electrical system to provide unmatched levels of warmth and comfort.  With Synergy

®

 Pro-Plus 

apparel, wearers can be warm without the bulk and discomfort typically caused by excessive layers 

of clothing. Providing increased warmth and mobility in cold temperatures, Synergy

®

 Pro-Plus 

12-volt apparel helps reduce fatigue while increasing safety and enjoyment.

Each Synergy

®

 Pro-Plus garment is heated using a series of strategically placed flexible carbon 

fiber heating elements, connected using thermoplastic elastomer wire for maximum comfort

and efficiency. 

For the best possible heating performance, it is recommended that Synergy

®

 Pro-Plus apparel be 

form-fitting without hindering riders’ movement and comfort. For the effective and efficient transfer-

ring of heat to the person’s body, it is recommended that layering under the heated apparel be 

kept to a minimum. Heavy thick layers, such as sweatshirts and sweatpants, increase the space 

between the garment and the wearer, decreasing the effectiveness of the heating elements. 

 WARNING: Connecting Tourmaster

®

 Synergy

®

 Pro-Plus 12V heated riding 

 

apparel to any other power source besides your vehicle’s 12V battery system  

 

will damage the heating elements, void the warranty, and may cause injury 

 

or death. In addition, Tourmaster

®

 Synergy

®

 Pro-Plus 12V apparel cannot 

 

be combined with any other brand of heated apparel.

Synergy

®

 Pro-Plus

12-Volt Heated Riding Apparel

Summary of Contents for Synergy Pro-Plus





















Reviews: