KTM Lc8 Xenon-Fog light
Installation Instructions
TOURING RALLYE RACING TECHNOLOGY
09-370-0101-1
These instructions are at our present level of knowledge.
Legal requirement for correctness do not exist. Thechnical issues subject to change.
11
12
13
Set the mounting bracket wiht the lights between
the fairing suppors but set the ballast up front
before as shown in pic. 11.
Screw the mount on the fairing support with the
M6x16 screws ad M6 nuts on the outside.
Now set the ballast in the mounting bracket and
secure it with the rubber O-ring. Pic. 12+13.
MAKE SURE TO CONNECT THE BALLAST POWER
SUPPLY CABLE THE CORRECT WAY AS SHOWN ON
PICTURE 12. GRAY FINGERS ENGAGE WEDGE
SHAPED METAL LATCH ON THE OUTSIDE OF THE
BALLAST!! STUDY IMAGE 12 CAREFULLY PRIOR TO
CONNECTING.
REVERSE POLARITY WILL DESTROY THE BALLAST.
STUDY ALSO THE ENGAGEMENT OF THE
HIGHVOLTAGE XENON CABLE TO XENON LIGHT
HOUSING. EXCESSIVE FORCE WILL DAMAGE THE
ENGAGEMENT.
Connect the power supply cable as shown in Pic.
12 and route the high voltage cable to the left
and connect it in the headlight.
