DVR-0031-1080P
User Guide
I. Product Overview
1. Power Switch
2. USB Port
3. Micro SD Card Slot
4. Camera Lens
5. Blue Indicator Light
II. What’s in the Box
-1× Smoke Detector Camera
-1× USB Cable
-1× DC 5V Charging Adapter
-1× 2.4 GHz Remote Controller
-1× 3m USB Cable
-4× Double-Sided Adhesive Foam Pads
-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)
III. Operation
>> Before using, make sure that the smoke detector camera is fully recharged.
>> Please make sure the Micro SD card (4GB-32GB, format it for the first usage) is
securely fitted into the camera’s SD card slot, or it will not work. A SDHC Class 10
Micro SD card is recommended. If the Micro SD card cannot be read, the camera
will not respond correctly to your operation.
3.1. POWER ON/OFF
3.1.1. Slide the power switch to the
ON
position. Power on the camera by pressing
the Power Button for 3 seconds. The blue indicator light will stay illuminated, indicat-
ing the camera has entered into standby mode automatically.
3.1.2. Power off the camera by pressing the Power Button for 3 seconds again. The
blue indicator light will turn off. Slide the power switch to the
OFF
position.
[Note]:
The camera will shut down automatically if it is in standby mode without any operation more
than 1 minute.
3.2. VIDEO RECORDING
3.2.1. Slide the power switch to the
ON
position. Power on the camera by pressing
the Power Button for 3 seconds. The blue indicator light will stay illuminated, indicat-
ing the camera has entered into standby mode automatically.
3.2.2. Press the Video Recording Button once to record video. The blue indicator
light will flash once and then turn off.
3.2.3. Press the Video Recording Button once again to stop recording video. The
blue indicator light will stay illuminated, indicating the camera is back to standby
mode.
[Notes]:
1). A video file will be generated and saved every 10 minutes automatically.
2). The smoke detector camera can record video continuously for 2.5 hours on a full charge.
3).Video Resolution: 1920×1080P Video Format: AVI
3.3. CAMERA/STILL PHOTOGRAPHY
3.3.1. Slide the power switch to the
ON
position. Power on the camera by pressing
the Power Button for 3 seconds. The blue indicator light will stay illuminated, indicat-
ing the camera has entered into standby mode automatically.
3.3.2. Press the Camera Button once to take a photo. The blue indicator light will
flash once and then stay illuminated, indicating the camera is back to standby mode.
3.4. MOTION DETECTION VIDEO RECORDING
3.4.1. Slide the power switch to the
ON
position. Power on the camera by pressing
the Power Button for 3 seconds. The blue indicator light will stay illuminated, indicat-
ing the camera has entered into standby mode automatically.
3.4.2. Press the Motion Detection Recording Button once to enter into motion detec-
tion recording mode. The blue indicator light will flash 3 times and then turn off.
3.4.3. When a movement is detected, the blue indicator light will flash once and the
camera will start recording video automatically.
3.4.4. Press the Motion Detection Recording Button once again to exit motion detec-
tion recording mode. The blue indicator light will stay illuminated, indicating the
camera is back to standby mode.
[Note]:
A video file will be generated and saved every 3 minutes automatically.
IV. Video/Image Files Uploads
4.1. Power off the camera, remove the Micro SD card and insert it into a card reader.
4.2. Insert the card reader into a PC computer.
4.3. The Micro SD card will be recognized as a removable disk drive.
4.4. All the files can be accessed in the “
DCIM
” folder.
V. Setting Time/Date Stamp
5.1. Power off the camera, remove the Micro SD card and insert it into a card reader.
5.2. Insert the card reader into a PC computer.
5.3. Removable disk drive folder appears.
5.4. Click on the drive in the root directory and inside the root directory, create a file
named “time.txt”.
5.5. Write the current date and time in the “time.txt” file with the correct format:
YYYY.MM.DD HH:MM:SS (For example: 2016.04.12 14:24:32). Save this file.
5.6. Restart the camera and the system will upgrade the program automatically.
VI. Charging
6.1. Connect the smoke detector camera to an outlet AC power socket by using the
USB cable and charging adapter provided.
6.2. The blue indicator light will be illuminated during the charging process.
6.3. It will take 5 hours to obtain a full charge.
6.4. The blue indicator light will not change even when the smoke detector camera
is fully recharged.
6. Red Indicator Light
7. Power Button
8. Camera Button
9. Video Recording Button
10. Motion Detection Recording Button
[Note]:
The smoke detector camera can be charged whether it is on or off.
