![TouchWand Wanderfull Hub User Manual Download Page 81](http://html1.mh-extra.com/html/touchwand/wanderfull-hub/wanderfull-hub_user-manual_1140392081.webp)
Wanderfull Technical Manual
81
Wanderfull Hub factory Reset
1.
This process removes all previous database files and installs version 187, which is
already backed up locally in the Wanderfull Hub (
only if version 188 was already
updated prior to this action
).
2.
Insert the PIN through the hole and press on the hidden reset push button located inside
the Wanderfull Hub for approx. 10 seconds.
3.
The unit will beep once after 5 seconds.
4.
Keep pressing the pin until the unit will beep twice after
approx. 5
seconds from the last
Beep.
5.
Remove the pin ftom the hole.
6.
The LED lights will flash green 3 times and then the green light will be on for approx. 30
seconds.
7.
After
approx.
30 seconds the LED lights will flash in red for 3 times and the unit will beep
3 times.
8.
The red LED will light continuously for approx. 20 seconds and the unit will beep long
once.
9.
The red LED lights will go off.
10.
The controller will initiate the restart process that will take approx. 2 minutes.
11.
Wanderfull Hub version will be 187.
11.
Now you can update the firmware version again to the latest version
–
188 or higher.
12.
For visual review of the Factory reset process press