Touchstone TV Lift
www.touchstonehomeproducts.com
800.215.1990
8
Operating the Whisper Lift II PRO TV Lift
Initialize the Whisper Lift II PRO Lift
PLEASE RUN INITILIZATION PROCEDURE BEFORE OPERATING LIFT AFTER INSTALLATION!
Before you run the Whisper Lift II PRO Lift, you will need to initialize the Control box. To initialize the control
box, you will need to do the following:
1. Press and HOLD the UP and DOWN button on the wired remote control together at the same time until the red
light on the top of the control box starts to flash.
2. Release the UP and DOWN button and the indicator light on the top of the control box will flash 3 times and turn
off. The lift will go all the way to the bottom, back up the top and all the way down to the bottom again. The red
light on the control box will come back on when the initialization procedure is complete.
**Note: Do not proceed until this procedure is complete.
**DO NOT INSTALL COMPONENTS IN CABINETS OR UNDER TV UNTIL AFTER RUNNING THE LIFT
INITIALIZATION PROCESS.
The initialization process is now complete and you can now use your Whisper Lift II PRO!
Press and HOLD both
UP and DOWN button
simultaneously.
