Chapter 5
:
Installing and Connecting your Telephony Gateway
Release 16 STANDARD 1.3 October 2015
Touchstone TG1652G Telephony Gateway User Guide
Copyright ARRIS Enterprises, Inc. 2015. All Rights Reserved.
28
2. Drill holes for the mounting screws through the marked locations.
3. If using drywall anchors, set them into the wall. Then, drive the screws into the wall
leaving a gap of about 1/8” (3 mm) between the screw head and the wall. If not using
anchors, just drive the screws.
4. Slip both mounting slots in the back of the mounting bracket over the screws, then slide
the bracket down until the narrow end of the keyhole slot contacts the screw shaft.
5. Hang the Telephony Gateway on the wall by inserting the six tabs on the mounting bracket
into the six slots in the back of the Telephony Gateway and sliding the Telephony Gateway
down until it drops in place on the bracket.
