background image

Max Load Capacity: 500 lb (227 kg)

ISSUED: 10-18-06  SHEET #: 202-9172-4  08-14-14

Installation and Assembly:

Installation and Assembly:

Installation and Assembly:

Installation and Assembly:

Installation and Assembly:

Mount 

Mount 

Mount 

Mount 

Mount for Panasonic TH-103PF12U, TH-103PH9UK, TH-103VX200U and

for Panasonic TH-103PF12U, TH-103PH9UK, TH-103VX200U and

for Panasonic TH-103PF12U, TH-103PH9UK, TH-103VX200U and

for Panasonic TH-103PF12U, TH-103PH9UK, TH-103VX200U and

for Panasonic TH-103PF12U, TH-103PH9UK, TH-103VX200U and

TH-103PB1U

TH-103PB1U

TH-103PB1U

TH-103PB1U

TH-103PB1U

Model:

  PANA-103MTV

2300 White Oak Circle.  • Aroura, IL 60502  •  (800) 856-2112  •  www.peerlessmounts.com

Summary of Contents for PANA-103MTV

Page 1: ... Mount for Panasonic TH 103PF12U TH 103PH9UK TH 103VX200U and for Panasonic TH 103PF12U TH 103PH9UK TH 103VX200U and for Panasonic TH 103PF12U TH 103PH9UK TH 103VX200U and for Panasonic TH 103PF12U TH 103PH9UK TH 103VX200U and for Panasonic TH 103PF12U TH 103PH9UK TH 103VX200U and TH 103PB1U TH 103PB1U TH 103PB1U TH 103PB1U TH 103PB1U Model PANA 103MTV 2300 White Oak Circle Aroura IL 60502 800 856...

Page 2: ...rofessional Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard ware and components Never exceed the Maximum Load Capacity of 500 lb 227 kg Always use an assistant or mechanical lifting equipment to safely lift and position equipment Tighten screws firmly but do not overtighten Overtightening can damage the items greatly reducing their...

Page 3: ...rface Distance between centers of wall plates A must be 59 5 1511mm and wall plates A must be level with one another M10 x 20 mm socket screws J nylock nuts H and SAE wahers I may be used to attach wall plates to wall Note If using custom fasteners to attach wall plates to wall be sure that fasteners can support the combined weight of all attached equipment and hardware 1 WARNING If wall mounts ar...

Page 4: ... E with cotter pin F as show below Attach tilt plates B to wall plates A by sliding tilt plate B onto clevis pin E per set of brackets Note Screen not shown for clarity Set tilt plate B to desired tilt shown in detail 2 Secure with one clevis pin E two washers D and one cotter pin F per set of brackets DETAIL 1 DETAIL 2 2 3 4 B C G A B D F E A B 4 2 0 2011PeerlessIndustries Inc Allrightsreserved P...

Reviews: