LINK Cart Document Camera Shelf
#55140
Assembly Instructions:
Before you begin, please make sure all parts and proper quantities are
included. Any parts damaged during shipment must be reported within
15 days of receipt. To report information regarding damages or if you
have any questions, please call 1-800-235-1262.
1. Attach support brackets
A Att
h th l ft
d i ht
t b
k t t th LINK
t
To purchase parts or accessories, please contact us at
Thank you for choosing Spectrum products!
(1) 039622
2" Grommet
Tools Required:
4mm hex wrench (included)
Phillip screwdriver
Electric drill w/ #1 Phillips extension
(1) 025039
4mm Hex Wrench
(8) 026073
#8 x 3/4" PHSM Screws
(4) 044541
1/4-20 x 20mm JC Bolts
(2) 056886
12" x 8" Folding Brackets
(8) 0100167
#8 x 1/2" PH Thrd
Ctg Screws
050581XR6 Page 1 of 2
A. Determine the height you would like the shelf to be mounted.
B. Open each folding bracket, and align the mounting holes at the desired height.
C. With an electric drill, driver extension, and #1 Phillips driver, attach each folding bracket to the support brackets
with (3) #8 x 1/2" PHSM screws. Tighten securely, but be careful not to strip out the holes.
Figure 2
.
LINK Cart Document Camera Shelf
#55140
Assembly Instructions:
Before you begin, please make sure all parts and proper quantities are
included. Any parts damaged during shipment must be reported within
15 days of receipt. To report information regarding damages or if you
have any questions, please call 1-800-235-1262.
1. Attach support brackets
A. Attach the left and right support brackets to the LINK cart as
shown using (2) 1/4-20 x 20mm JC bolts per bracket.
Figure 1
.
B. Do not tighten the JC bolts completely yet.
Figure 1
To purchase parts or accessories, please contact us at
Thank you for choosing Spectrum products!
(1) 039622
2" Grommet
Tools Required:
4mm hex wrench (included)
Phillip screwdriver
Electric drill w/ #1 Phillips extension
(1) 025039
4mm Hex Wrench
(8) 026073
#8 x 3/4" PHSM Screws
(4) 044541
1/4-20 x 20mm JC Bolts
(2) 056886
12" x 8" Folding Brackets
(8) 0100167
#8 x 1/2" PH Thrd
Ctg Screws
Attached with (2) JC bolts
(Do not tighten completely)
2. Attach folding brackets
Figure 2
Folding Bracket
#8 x 1/2" PHSM screws
(3 per bracket)
Support Bracket
