Touch T714C, Owner'S Manual

Page: 14 / 20

14
PART 4. TROUBLESHOOTING
Brewer does not have power.
• Plug the brewer into an independent outlet.
• Check to be sure that it is plugged in securely.
• Plug into a different outlet.
• Reset your home’s circuit breaker, if necessary.
• Make sure that the Power Button has been turned ON and the Power Light is illuminating.
Brewer will not brew.
• If the upper left blue Low Water Light is blinking, then add water to the Water Tank. Make sure the Water Tank is seated and secured in properly on its base.
• Double check the top needle underneath the cover to see if it is clear of coffee grind. If the top needle is clogged use a paper clip or tooth brush to unclog
the top needle.
• Check to make sure Pod is not damaged.
Brewing a partial cup.
• Double check the top needle to see if it is clogged. If so, unclog the top needle using a paper clip or a tooth brush.
• Double check the Red Cup Holder to see if the two bottom needles are clogged. If they are clogged, then use a paper clip or a tooth brush to clean the
two bottom needles.
Brewer shuts off automatically.
• The brewer is designed to automatically turn OFF after 30 minutes of non-use to conserve power.
• Double check the top needle underneath the cover to see if it is clear of coffee grind. If the top needle is clogged use a paper clip or tooth brush to unclog
the top needle.
• On a rare occasion, the brewer may shut OFF while brewing. This may happen if the water in the water tank is too hot. This is done to protect the heating
mechanism in the brewer. If this happens, let the brewer cool down and replace the water in the water tank with room temperature water. If the brewer
continues to shut OFF while brewing after replacing the water, please contact the customer service.