Touch Breeze All-in-one, User Manual

Page: 95 / 127

- 88 -
4. Software Status Setting Commands
When the system is powered on, the VFD will read the DIP switches to set the Command
Type , Baud Rate , Parity , and International Character set . The user can change the
settings as follows:
1.6. Baud Rate Setting Command
STX 05 B n
ETX
/Change the baud rate setting/
ASCII Format STX 05 B n ETX
Dec. Format [02] [05] [66] n [03]
Hex. Format
[02h][05h][42h] n
[ 0 3 h ]
30h
≦
n
≦
33h
Description Change the display communication baud rate. The
baud rate setting can be selected from 4800 to
38400.
n Baud rate
30h 4800
31h 9600
32h 19200
33h 38400
1.7. Parity Check Setting Command
STX 05 P n ETX /Change the Parity check setting/
ASCII Format STX 05 P n ETX
Dec. Format [02] [05] [80] n
[ 0 3 ]
Hex. Format
[02h][05h][50h] n
[ 0 3 h ]
n =30h, 31h
Description Change the display communication parity. Set 8
data bit and the parity set for even or non-parity.
n
Parity
check
30h None-parity
31h Even-parity