150
150
〈YT87S5〉
〈YT87S7〉
150
150
150
〈Mounting of YH87
S
〉
〈Mounting of YT87S5
S
and YT87S7
R
〉
①Mark hole positions with a
scriber so that the main body
can be mounted horizontally
and drill pilot holes with a
diameter of 6mm and a depth
of 40mm or more.
②Drive the provided resin plugs
into the pilot holes, and fasten
the main body with the four wall
mounting screws (flat head
tapping screw φ5×40) using
a screwdriver with a long tip,
while taking care not to allow
the tool to hit the main body.
Using a level gauge etc., check
that the main body is mounted
horizontally. When using a
level gauge etc., place the
plastic bag in which the main
body was contained, etc. on
the main body to prevent it
from being scratched.
③Set the cover from under the
main body and fasten it by
tightening the two cover
assembling screws (hexagon
socket head countersunk screw
M3×20) with the provided
hexagonal wrench.
①Mark hole positions with a
scriber so that the main body
can be mounted horizontally
and drill pilot holes with a
diameter of 6mm and a depth
of 40mm or more.
②Drive the provided resin plugs
into the pilot holes, and fasten
the main body with the three
(four in the case of YT87S7)
wall mounting screws (flat
head tapping screw φ5×40)
using a screwdriver with a long
tip, while taking care not to
allow the tool to hit the main
body.
Using a level gauge etc., check
that the main body is mounted
horizontally. When using a level
gauge etc., place the plastic
bag in which the main body was
contained, etc. on the main
body to prevent it from being
scratched.
③Set the cover from under the
main body and fasten it by
tightening the two (three in
the case of YT87S7) cover
assembling screws (hexagon
socket head countersunk screw
M3×20) with the provided
hexagonal wrench.
〈Front〉
〈Front〉
100
50
50
Wall mounting screw position
Wall mounting screw position
Pilot hole
Pilot hole
Resin plug
Resin plug
Main body
■Use the provided wall mounting
screw for mounting the product.
Not doing so could cause the mounted
product to become unstable and fall to
result in injury.
WARNING
■Use the provided wall mounting
screw for mounting the product.
Not doing so could cause the mounted
product to become unstable and fall to
result in injury.
WARNING
■After mounting the product,
check that it does not rattle.
If the product rattles, it could come
off or the wall could be damaged,
causing the user to fall down to
get injured.
WARNING
■After mounting the product,
check that it does not rattle.
If the product rattles, it could come
off or the wall could be damaged,
causing the user to fall down to
get injured.
WARNING
Wall mounting screws
(Flat head tapping screw φ5×40)
Wall mounting screws
(Flat head tapping screw φ5×40)
Cover
Cover
Cover assembling screws
(Hexagon socket head countersunk
screw M3×20)
Cover assembling screws
(Hexagon socket head countersunk
screw M3×20)
※Shown in the figure below is YT87S5. Mount YT87S7 in the same manner.
※Be sure to give the included owner's manual to the customer.
